Analisa Penampang Balok Beton Bertulang Terhadap Variasi Jenis Keruntuhan
DOI:
https://doi.org/10.25077/jbkd.3.2.81-86.2025Keywords:
beton bertulang, penampang balok, under reinforced, balanced reinforced, over reinforcedAbstract
Reinforced concrete beams are important structural elements in building construction that function to withstand bending and transverse loads. One crucial aspect in beam design is the proportion between the tensile capacity of the reinforcing steel and the compressive capacity of the concrete in the beam cross-section, which determines the type of failure that may occur, namely under reinforced, balanced reinforced, and over reinforced. Understanding the behavior of each type of failure is very important in the process of designing reinforced concrete structures to ensure safety and material efficiency. Therefore, in this study, cross-section analysis was conducted with a variation of the three types of failure through an analytical approach to the cross-section. Calculations were carried out with the help of RCCSA software. The results of the study in the form of moments and curvatures, loads and deflections, strain distribution and concrete stress distribution show that the under reinforced type of failure is the best for designing reinforced concrete beams.
Downloads
References
ACI 318-19. (2019). Building Code Requirements for Structural Concrete. American Concrete Institute.
Cafarelli, R., Accornero, F., & Carpinteri, A. (2024). Failure-mode scale transitions in RC and PC beams. Smart Construction and Sustainable Cities, 2(1), 5. https://doi.org/10.1007/s44268-024-00026-6
Elrakib, T. M., & Arafa, A. I. (2012). Experimental evaluation of the common defects in the execution of reinforced concrete beams under flexural loading. HBRC Journal, 8(1), 47–57. https://doi.org/10.1016/j.hbrcj.2012.08.006
Hutaajulu, L. S. N. (2023). Analisis Tegangan Lentur pada Balok Beton Bertulang Dengan Beban Terpusat. Indonesian Journal Of Civil Engineering Education, 9(2), 38. https://doi.org/10.20961/ijcee.v9i2.83604
Mansor, A. A., Mohammed, A. S., & Salman, W. D. (2020). Effect of longitudinal steel reinforcement ratio on deflection and ductility in reinforced concrete beams. IOP Conference Series: Materials Science and Engineering, 888(1), 012008. https://doi.org/10.1088/1757-899X/888/1/012008
Michael, A., & Hamilton, H. R. (2021). Experimental Ductility of Compression-Controlled Flexural Members Using CFRP Grid to Confine Concrete. Materials, 14(18), 5163. https://doi.org/10.3390/ma14185163
Nurliana, A. L., & Walujodjati, E. (2024). Analisis Kuat Lentur dan Geser Balok Beton dengan Bundel Tulangan. Jurnal Konstruksi, 22(1), 101–108. https://doi.org/10.33364/konstruksi/v.22-1.1532
Słowik, M. (2019). The analysis of failure in concrete and reinforced concrete beams with different reinforcement ratio. Archive of Applied Mechanics, 89(5), 885–895. https://doi.org/10.1007/s00419-018-1476-5
SNI 2847:2019. (2019). Persyaratan Beton Struktural untuk Bangunan Gedung dan Penjelasan. BSN.
Thamrin, R. (2014). User Manual of Reinforced Concrete Cross section Analysis (RCCSA) V4.2. Jurusan Teknik Sipil, Fakultas Teknik, Universitas Andalas, Padang, Indonesia.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Riza Aryanti
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Jurnal Bangunan, Konstruksi & Desain (JBKD) is licensed under CC BY-NC 4.0
